here you'll find everything i used to install linux on the u1 via the
network.  aside from these files, you'll need:

	-a dhcp server (example is for ISC dhcpd v3)

	-tftpd-hpa (needed by pxelinux.0, any tftpd supported by pxelinux works)
	**NOTE** i had problems with tftpd-hpa running via inetd.  i just ran
	******** it standalone: /usr/sbin/in.tftpd -l -s /tftpboot

	-

that's it really, then just install as normal.
	-keyboard tpe is jp106 , works wonders
	-i used the experimental xfree 4.2.x packages for sid, 4.1.x wont
	 recognize the display with the ati driver (although the vesa driver
	 works)
 
	

what else did i do while playing around:
	-deleted the second partition (hda5) and replaced it with:
		-1gb fat32 (for sharing between linux and xp)
		-500mb swap
		-500mb spare
		-8gb linux partition
	-made an image of the first partition over the network with dd and ssh
	 in case i mess something up real bad
	-voided my non-existant warranty to check out what the harddrive looked
	 like: it's a toshiba model, slightly smaller than a pcmcia type 3 card
	 with a modified compact flash connector (modified in that there's a 
	 round and an oval socket flanking the cf socket, to make sure the 
	 drive isn't plugged into the ribbon cable the wrong way )
	-dual booted as described http://www.xminc.com/linux/WindowsXPGrubMandrake82.html
	 	-installing lilo into /dev/hda8 instead of /dev/hda
		-dd if=/dev/hda8 of=bb-lilo.lnx bs=512 count=1
		-copied that file onto /dev/hda5 (new smaller drive d:)
		-rebooted into windows, copy d:\bb-lilo.lnx c:\bb-lilo.lnx, added c:\bb-lilo.lnx="Debian" to c:\boot.ini (you may need to attrib -s -h -r c:\boot.ini first, be sure to +s +h +r when done)
		-be sure to update bb-lilo.lnx when installing a new kernel